Replacement material

The replacement filter holder is made of plastic and can be replaced with a flick of the wrist. The quality of the AeroPress can be described quickly: fast, easy and a maximum taste experience. This hybrid method combines two coffee preparation methods: That of the French Press with that of pressure filtering. First, the ground coffee is poured over hot water, stirred and finally filtered under pressure. And that's it. This achieves everything between (almost) espresso and filter coffee.

The replacement seal is made of rubber and can be replaced with a flick of the wrist. The quality of the AeroPress can be described quickly: fast, easy and a maximum taste experience. This hybrid method combines two coffee preparation methods: That of the French Press with that of pressure filtering. First, the ground coffee is poured over hot water, stirred and finally filtered under pressure. And that's it. This achieves everything between (almost) espresso and filter coffee.

This stainless steel replacement sieve is suitable for the Cafelat Robot espresso machines in the professional and pressurised sieves.

This 57.5 mm stainless steel filter sieve is designed for the Cafelat Robot Manual espresso machines. For coffee, a dosage of about 18-20 grams, for espresso a dosage of up to 25 grams is recommended.

Improve the precision and consistency of your espresso shots with the help of the Cafelat Robot Levelling Tamper.Featuring the same bevelled stainless steel base as the standard Robot tamper, the Levelling Tamper also has a precision-milled alignment guide to ensure it stays perfectly centred and level when you lower it into the strainer and compact your coffee bed.

Wooden sleeve for your small "Chemex" jug (3 cups)The wooden sleeve consisting of two parts and 1 leather strap

Wooden sleeve for your large "Chemex" jug (6,8,10 cups)The wooden sleeve consists of two parts and 1 leather strap

Blue Comandante C40 protective felt cover - for all Comandante C40 MK4 Nitro Blade grinders Beautiful and practical cover for the Comandante C40. Ideal for transport, on the road or at home. A must-have for every Comandante fan.

Rote Comandante C40 Schutzhülle aus Filz - für alle Comandante C40 MK4 Nitro Blade MühlenSchöner und praktischer Schtuz für die Comandante C40. Ideal für den Transport, für unterwegs oder auch für zu Hause. Ein must-have für jeden Comandante-Fan.

This central axle is an original spare part of the Comandante C40. The axle is made of robust stainless steel. However, care should be taken when changing the axle: There is a risk of injury due to the proximity to the sharp grinding mechanism.

This replacement crank with transparent cover is an original spare part of the Hadmühle Comandante C40.   The crank is made of robust stainless steel and impresses with its unique quality. The lid is made of transparent glass.

This spring is an original spare part for the Comandante C40 hand mill. The spring is made of stainless steel. When disassembling the coffee grinder, the correct sequence should be followed.

The Comandante C40 glass, brown is a perfect complement to the C40 hand grinder.Not only as a replacement glass for the C40, but are also perfect as a bean container for on the go as well as for pre-portioning.without lid

The Comandante C40 glass, orange is a perfect complement to the C40 hand grinder.Not only as a replacement glass for the C40, but are also perfect as a bean container for on the go as well as for pre-portioning.without lid

The Comandante C40 glass, pink is a perfect complement to the C40 hand grinder.Not only as a replacement glass for the C40, but are also perfect as a bean container for on the go as well as for pre-portioning.without lid

The Comandante C40 glass, purple is a perfect complement to the C40 hand grinder.Not only as a replacement glass for the C40, but are also perfect as a bean container for on the go as well as for pre-portioning.without lid

The Comandante C40 glass, red is a perfect complement to the C40 hand grinder.Not only as a replacement glass for the C40, but are also perfect as a bean container for on the go as well as for pre-portioning.without lid

This dial for adjusting the grinding degree is an original spare part for the Comandante C40 hand mill.

Replacement lid for the glass container for the Comandante hand millsuitable for the transparent and the coloured container.

This silicone O-ring is an original spare part for the Comandante C40 hand mill.

With Red Clix, more grind settings are possible with the Comandante hand mill.The professional sometimes needs an extra click between the existing settings. That is why provides the RED CLIX axle with a special fine thread and also manufactures the corresponding RED CLIX grinder adjuster with a corresponding fine thread counterpart. This doubles the adjustment range for all grinds and refines the grain size tuning. The clicks are therefore much finer and allow good fine tuning, especially in the espresso range. The familiar, securely engaging click mechanism has been retained.The normal setting is 28 clicks, with RED CLIX 56 clicks are possible. RED CLIX gives an extra click between each standard click. This small intermediate step may give you just what you need for the best espresso shot.

Water tank made of sturdy, food-safe plastic

The original brew head shower screen for all E61 Faema brew groups of the models of ECM Mechanika, Technika, Elektronika and Classika.

Das Upgrade Kit für die manuelle Regelung des Durchflusses bei allen ECM Siebträger Geräte mit E61 Brühgruppe.Perfekt passend für ECM Mechanika, Technika, Classika und Synchronika und andere Kaffeemaschinenmarken mit einer E61-Brühgruppe und einer Rotationspumpe.Lieferumfang:1 Manometer, Anzeige bis 16 Bar, Durchmesser 45mm 1 Durchflussregler mit Edelstahlglocke 1 Dichtung für die Edelstahlglocke 1 Feder

Strainer holder for E.S.E. pads, incl. strainer, chrome-plated brass. Original spare part for ECM portafilter machines. The ECM portafilter of the Profi Line are balanced and fit perfectly in the hand. This portafilter is specially designed for E.S.E pads only, 44mm (standard ESE pads) and fits all Faema E61 brew groups and the E61 brew groups from ECM, Profitec and Rocket.